Dear Seniors: We are an R&D in the automobile sector.I would like to know about the Training sessions which will be covered in these kind of Industries. Regards, Priya R
From India, Coimbatore
From India, Coimbatore
Hi
Apart form the core technical training the two other topics for training that could be very relevant to and R&D setup are
- Creativity/ Out of the box thinking/ innovation strategies
- R&D with cost savings as the focus / Costing implications and R&D
Regards
From India, Mumbai
490Apart form the core technical training the two other topics for training that could be very relevant to and R&D setup are
- Creativity/ Out of the box thinking/ innovation strategies
- R&D with cost savings as the focus / Costing implications and R&D
Regards
From India, Mumbai
Dear Priya,
Your question is small but its reply is quite long.
Recently I conducted a training for one automotive company. For this I did survey of auto-mobile companies of the world as well as of India.
When you look at their financial reports, you will get their management efficiency ratios. You measure similar ratios for your company too. Once you measure, it will help you in benchmarking.
Classic example is of Inventory Turnover Ratio. While for Maruti Suzuki India it is 30.47 for FY 2010-2011, for my client it was just 2.0
Most of the Indian companies are laggard because leadership does not encourage implementation of the knowledge acquired during the degree courses of engineering, management etc. To implement this you do not require any creativity.
Coming back to the Inventory Turnover Ratio. My client did not implement basics of material management, leave aside implementation of the concepts of Supply Chain Management. Thus spoke the difference in Inventory Turnover Ratio. Similar is case of other ratios too.
Thanks,
Dinesh V Divekar
From India, Bangalore
Your question is small but its reply is quite long.
Recently I conducted a training for one automotive company. For this I did survey of auto-mobile companies of the world as well as of India.
When you look at their financial reports, you will get their management efficiency ratios. You measure similar ratios for your company too. Once you measure, it will help you in benchmarking.
Classic example is of Inventory Turnover Ratio. While for Maruti Suzuki India it is 30.47 for FY 2010-2011, for my client it was just 2.0
Most of the Indian companies are laggard because leadership does not encourage implementation of the knowledge acquired during the degree courses of engineering, management etc. To implement this you do not require any creativity.
Coming back to the Inventory Turnover Ratio. My client did not implement basics of material management, leave aside implementation of the concepts of Supply Chain Management. Thus spoke the difference in Inventory Turnover Ratio. Similar is case of other ratios too.
Thanks,
Dinesh V Divekar
From India, Bangalore
You need to do a Training Needs Assessment (TNA) of all your staff to determine exactly what training your organisation needs.
Every organisation is different, therefore there is no generic, one size fits all training program.
Once you have determined the training required, you can then write the course to meet your needs, or outsource the training to a specialist training organisation.
You will find all the information you need on TNA by using the Research Box at the top of the page.
From Australia, Melbourne
Every organisation is different, therefore there is no generic, one size fits all training program.
Once you have determined the training required, you can then write the course to meet your needs, or outsource the training to a specialist training organisation.
You will find all the information you need on TNA by using the Research Box at the top of the page.
From Australia, Melbourne
Dear Ms Priya,
You can go for following topics :
1. Quality Function Deployment (QFD)
2. PPAP
3. FMEA
4. APQP
As generally these topics are of interest for R & D. But again this depends on existing level of skills. SPC & 7QC Tools (old & new) should be starting point if they are not familiar & using regularly.
Thanks & Regards,
Shekhar Deshpande
From Kenya, Nairobi
You can go for following topics :
1. Quality Function Deployment (QFD)
2. PPAP
3. FMEA
4. APQP
As generally these topics are of interest for R & D. But again this depends on existing level of skills. SPC & 7QC Tools (old & new) should be starting point if they are not familiar & using regularly.
Thanks & Regards,
Shekhar Deshpande
From Kenya, Nairobi
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.
SPECIAL HIGH INTENSITY TRAINING (S.H.I.T).gif
HR Generalist Practical Training in Delhi.pdf