Hi,
I am a supervisor in the electronics industry and have been handling overall production control. Things were going fine until I was transferred to another section. I've met a new set of workers, line leaders, technicians, and engineers under my control. My problem started when my manager demanded a high quota for my section. When I explained this to my group, they assured me that it would be achieved. However, during the actual process, some workers were unable to reach the target due to long machine breakdowns, and the technicians were not assisting them. I have already instructed my engineers to communicate with them, but no progress has been made. I have also personally spoken with the technicians, but these experienced workers do not seem to listen to the new staff in the section.
What should I do with these non-performing workers? What kind of training do I need to enhance my leadership abilities, if any? I am considering providing incentives; do you think this will work?
Thanks,
Engr. Robin
Supervisor
From Philippines, Makati
Acknowledge(0)
Amend(0)
I am a supervisor in the electronics industry and have been handling overall production control. Things were going fine until I was transferred to another section. I've met a new set of workers, line leaders, technicians, and engineers under my control. My problem started when my manager demanded a high quota for my section. When I explained this to my group, they assured me that it would be achieved. However, during the actual process, some workers were unable to reach the target due to long machine breakdowns, and the technicians were not assisting them. I have already instructed my engineers to communicate with them, but no progress has been made. I have also personally spoken with the technicians, but these experienced workers do not seem to listen to the new staff in the section.
What should I do with these non-performing workers? What kind of training do I need to enhance my leadership abilities, if any? I am considering providing incentives; do you think this will work?
Thanks,
Engr. Robin
Supervisor
From Philippines, Makati
Acknowledge(0)Amend(0)
Dear Mr. Engr. Robin,
Greetings...
Let me put forward my suggestion in the most practical manner. Kindly try to understand there is no room for BASELESS EXCUSES.
KNOW YOURSELF - YOUR STRENGTH & WEAKNESS.
1) An applicant/individual is hired as an EMPLOYEE to get relevant things done, where he/she has to understand his ROLES & RESPONSIBILITIES to meet organizational GOALS.
2) You need to rely on LEADERSHIP SKILLS (including TEAM BUILDING & SUPERVISORY) that you need to demonstrate to save your job.
3) BLAME GAME WILL NEVER WORK. IT'S BETTER TO PRACTICE HOW TO BECOME PERFECT and AVOID REVEALING OUR WEAKNESS TO OTHERS.
4) Try your best to convince your TEAM MEMBERS to understand their RESPONSIBILITIES and discharge their duties ON TIME.
5) Develop your SELF-ESTEEM and maintain your dignity as a SUPERVISOR. Utilize your powers effectively without hurting anyone.
6) Maintain all your correspondence in BLACK & WHITE.
7) If anyone is trying to play games with you, it's time to initiate disciplinary action against them before your company starts incurring losses due to respected employees who don't want to obey their SUPERIORS.
8) Keep updating your superiors in writing about the existing scenario in a timely manner.
9) Learn to play a SAFE GAME.
Kindly do follow and implement my suggestions. Kindly get back to me after a week...
With profound regards
From India, Chennai
Acknowledge(0)Amend(0)
315Greetings...
Let me put forward my suggestion in the most practical manner. Kindly try to understand there is no room for BASELESS EXCUSES.
KNOW YOURSELF - YOUR STRENGTH & WEAKNESS.
1) An applicant/individual is hired as an EMPLOYEE to get relevant things done, where he/she has to understand his ROLES & RESPONSIBILITIES to meet organizational GOALS.
2) You need to rely on LEADERSHIP SKILLS (including TEAM BUILDING & SUPERVISORY) that you need to demonstrate to save your job.
3) BLAME GAME WILL NEVER WORK. IT'S BETTER TO PRACTICE HOW TO BECOME PERFECT and AVOID REVEALING OUR WEAKNESS TO OTHERS.
4) Try your best to convince your TEAM MEMBERS to understand their RESPONSIBILITIES and discharge their duties ON TIME.
5) Develop your SELF-ESTEEM and maintain your dignity as a SUPERVISOR. Utilize your powers effectively without hurting anyone.
6) Maintain all your correspondence in BLACK & WHITE.
7) If anyone is trying to play games with you, it's time to initiate disciplinary action against them before your company starts incurring losses due to respected employees who don't want to obey their SUPERIORS.
8) Keep updating your superiors in writing about the existing scenario in a timely manner.
9) Learn to play a SAFE GAME.
Kindly do follow and implement my suggestions. Kindly get back to me after a week...
With profound regards
From India, Chennai
Acknowledge(0)Amend(0)
Hello Robin,
I guess people anywhere in the world are essentially the same when it comes to a few situations--like the one you are in now :-)
Coming to your query, you haven't mentioned your caliber/ability to handle the tasks in which you aren't getting any support. Usually, the best way to handle such a category of people is to be a hands-on person YOURSELF--irrespective of the industry or function you are in.
If you can handle--at least to some extent--the machine repairs, suggest 'just get going'. When such level of people see a newbie giving orders, the usual tendency is to see it as a 'this guy is bossing us' situation & then respond accordingly. Hope you get the point.
When you notice a machine has broken down, instead of telling the maintenance staff "repair it", you can tell them "let's repair it" & LEAD by getting your hands dirty. If the guys are good technically, then their response will be to participate [if they aren't good technically, then they will take advantage of it & let you do the work]. In general, it's human nature to avoid or fear taking on anyone outside who knows 'his/her' job, something he/she should have been doing in the first place--after all, it could lead to redundancy if repeated & the worst-case scenario could be: he/she will lose the job: as simple as that. And to the extent I know about Filipino mentality & scenario, it should work.
To elaborate, you had mentioned rightly that you are treated as a 'newbie/outsider'--try ways to ensure that THEY BEGIN TO GET THE FEELING THAT YOU ARE ONE OF THEM.
So incentives may not work in this context @ this stage. Once you prove yourself to them, incentives will take over as the performance-enhancing tool.
However, please don't expect miracles overnight with this approach--over time you will reach a stage where you don't need to tell anything--things will be JUST taken care of.
Rgds,
TS
From India, Hyderabad
Acknowledge(0)Amend(0)
I guess people anywhere in the world are essentially the same when it comes to a few situations--like the one you are in now :-)
Coming to your query, you haven't mentioned your caliber/ability to handle the tasks in which you aren't getting any support. Usually, the best way to handle such a category of people is to be a hands-on person YOURSELF--irrespective of the industry or function you are in.
If you can handle--at least to some extent--the machine repairs, suggest 'just get going'. When such level of people see a newbie giving orders, the usual tendency is to see it as a 'this guy is bossing us' situation & then respond accordingly. Hope you get the point.
When you notice a machine has broken down, instead of telling the maintenance staff "repair it", you can tell them "let's repair it" & LEAD by getting your hands dirty. If the guys are good technically, then their response will be to participate [if they aren't good technically, then they will take advantage of it & let you do the work]. In general, it's human nature to avoid or fear taking on anyone outside who knows 'his/her' job, something he/she should have been doing in the first place--after all, it could lead to redundancy if repeated & the worst-case scenario could be: he/she will lose the job: as simple as that. And to the extent I know about Filipino mentality & scenario, it should work.
To elaborate, you had mentioned rightly that you are treated as a 'newbie/outsider'--try ways to ensure that THEY BEGIN TO GET THE FEELING THAT YOU ARE ONE OF THEM.
So incentives may not work in this context @ this stage. Once you prove yourself to them, incentives will take over as the performance-enhancing tool.
However, please don't expect miracles overnight with this approach--over time you will reach a stage where you don't need to tell anything--things will be JUST taken care of.
Rgds,
TS
From India, Hyderabad
Acknowledge(0)Amend(0)
Hi Mr. Robin,
This is a very similar situation that I have faced in the recent past when I joined a project at a Coal Mine in Jharkhand. The company had deployed 120 HEMM for production, but only 30 HEMM were in good condition for work, while the rest were in the workshop for maintenance. Furthermore, every employee was showing their attitude and didn't want to work in an organized manner. Only a few employees had accepted and obeyed the decisions, resulting in a drastic decrease in production. We worked out and implemented some good policies (which I have listed below), and after 3 to 4 months, the company started making a profit from this project, with everyone showing interest in working.
You stated in your problem that machinery had not been maintained by the technicians on time. As you identified the root cause of not achieving the target, you should focus on motivating the existing workers rather than hiring or making any hard decisions.
You should work on the following points:
1. Conduct an Employee Satisfaction Survey (if there is any dissatisfaction, address it positively).
2. Implement policies for career growth (such as promotions, job rotations, training, etc.).
3. Involve every line supervisor and seek suggestions from senior employees in the decision-making process.
4. Foster a group culture in work and appoint a representative who can be held accountable and responsible (reward and recognize all group members if work is completed on time or ahead of schedule).
5. Implement management by objective policies.
6. Train employees by showing teamwork-related videos.
7. Set aside one day every week for meetings with every employee to understand their problems and provide solutions.
8. Create an environment where every employee feels at home.
9. Regarding maintenance, create a separate maintenance team (involving only three employees) to supervise all technicians and their supervisors, ensuring that all equipment is in good working condition. Also, involve them in preventive maintenance activities.
10. Lastly, ensure working conditions are healthy and hazard-free (organize monthly meetings related to safety and precautions).
Hi, dude, this process may take time, but after three to four months, you will see fruitful results.
From India
Acknowledge(0)Amend(0)
This is a very similar situation that I have faced in the recent past when I joined a project at a Coal Mine in Jharkhand. The company had deployed 120 HEMM for production, but only 30 HEMM were in good condition for work, while the rest were in the workshop for maintenance. Furthermore, every employee was showing their attitude and didn't want to work in an organized manner. Only a few employees had accepted and obeyed the decisions, resulting in a drastic decrease in production. We worked out and implemented some good policies (which I have listed below), and after 3 to 4 months, the company started making a profit from this project, with everyone showing interest in working.
You stated in your problem that machinery had not been maintained by the technicians on time. As you identified the root cause of not achieving the target, you should focus on motivating the existing workers rather than hiring or making any hard decisions.
You should work on the following points:
1. Conduct an Employee Satisfaction Survey (if there is any dissatisfaction, address it positively).
2. Implement policies for career growth (such as promotions, job rotations, training, etc.).
3. Involve every line supervisor and seek suggestions from senior employees in the decision-making process.
4. Foster a group culture in work and appoint a representative who can be held accountable and responsible (reward and recognize all group members if work is completed on time or ahead of schedule).
5. Implement management by objective policies.
6. Train employees by showing teamwork-related videos.
7. Set aside one day every week for meetings with every employee to understand their problems and provide solutions.
8. Create an environment where every employee feels at home.
9. Regarding maintenance, create a separate maintenance team (involving only three employees) to supervise all technicians and their supervisors, ensuring that all equipment is in good working condition. Also, involve them in preventive maintenance activities.
10. Lastly, ensure working conditions are healthy and hazard-free (organize monthly meetings related to safety and precautions).
Hi, dude, this process may take time, but after three to four months, you will see fruitful results.
From India
Acknowledge(0)Amend(0)
Dear Mr. Robin,
I had the same worry as yours before when I used to handle big groups and teams in our organization. I came across an HR manager/friend who recommended a new methodology for handling unmotivated people in a team. The <link outdated-removed> (Search On Cite | Search On Google) gives you a new approach to becoming more productive and having more motivated teams and team leaders in any organization you are in. I do hope this will help you.
From Philippines, Marilag
Acknowledge(0)Amend(0)
I had the same worry as yours before when I used to handle big groups and teams in our organization. I came across an HR manager/friend who recommended a new methodology for handling unmotivated people in a team. The <link outdated-removed> (Search On Cite | Search On Google) gives you a new approach to becoming more productive and having more motivated teams and team leaders in any organization you are in. I do hope this will help you.
From Philippines, Marilag
Acknowledge(0)Amend(0)
Robin,
I would suggest you to wait and watch policy with providing training to employees. As you said, machine breakdown is the biggest problem leading to loss of productivity and company's money. Here, there are two aspects to consider: process and people. On the process side, you need to strengthen fundamentals to reduce downtime; otherwise, no incentive scheme will work. So, first, approach it from a people perspective, since you are new to this organization. Start by building relationships with the existing employees, greet them, inquire about personal matters within certain boundaries. By doing so, you can integrate yourself into their group. Once this rapport is established, you can organize a workshop on TPM, a Japanese method of managing machines to reduce downtime.
People perform at their best when they are persuaded, rather than pushed, especially when you are new to an organization with long-standing cultural practices. Therefore, don't act solely based on emotions; instead, focus on learning step by step and honing your personal leadership skills.
If you can effectively manage downtime in such a scenario, it will be remarkable, and you will definitely be recognized and rewarded by your higher management.
Focus on preventive measures rather than reactive solutions. In such situations, TPM will undoubtedly help in addressing breakdowns and repair issues.
Regards,
Raju Prasad
From India, Mumbai
Acknowledge(0)Amend(0)
I would suggest you to wait and watch policy with providing training to employees. As you said, machine breakdown is the biggest problem leading to loss of productivity and company's money. Here, there are two aspects to consider: process and people. On the process side, you need to strengthen fundamentals to reduce downtime; otherwise, no incentive scheme will work. So, first, approach it from a people perspective, since you are new to this organization. Start by building relationships with the existing employees, greet them, inquire about personal matters within certain boundaries. By doing so, you can integrate yourself into their group. Once this rapport is established, you can organize a workshop on TPM, a Japanese method of managing machines to reduce downtime.
People perform at their best when they are persuaded, rather than pushed, especially when you are new to an organization with long-standing cultural practices. Therefore, don't act solely based on emotions; instead, focus on learning step by step and honing your personal leadership skills.
If you can effectively manage downtime in such a scenario, it will be remarkable, and you will definitely be recognized and rewarded by your higher management.
Focus on preventive measures rather than reactive solutions. In such situations, TPM will undoubtedly help in addressing breakdowns and repair issues.
Regards,
Raju Prasad
From India, Mumbai
Acknowledge(0)Amend(0)
They are merely testing who you are..... You’re not alone...my advice " Dont let the situation change you You change the situation" you’ll feel better later... Rgds T
From Fiji, Suva
Acknowledge(0)Amend(0)
From Fiji, Suva
Acknowledge(0)Amend(0)
Hi everyone,
I am very grateful for your responses and I am taking notes on them. I just want to add a few things on how our management works:
1. There is a monthly evaluation for the employees. I grade them based on their individual and group performance.
2. Feedback will follow a few weeks after the evaluation once the results are returned from the HR department.
3. What makes things worse is when they receive low results in evaluation, they tend to revolt.
4. There are existing incentives given by the company for top-performing individuals, but it seems they don't care.
5. I am slowly getting to know them personally so that I could understand their sentiments towards work and towards me.
For greater success...
From Philippines, Makati
Acknowledge(0)Amend(0)
I am very grateful for your responses and I am taking notes on them. I just want to add a few things on how our management works:
1. There is a monthly evaluation for the employees. I grade them based on their individual and group performance.
2. Feedback will follow a few weeks after the evaluation once the results are returned from the HR department.
3. What makes things worse is when they receive low results in evaluation, they tend to revolt.
4. There are existing incentives given by the company for top-performing individuals, but it seems they don't care.
5. I am slowly getting to know them personally so that I could understand their sentiments towards work and towards me.
For greater success...
From Philippines, Makati
Acknowledge(0)Amend(0)
Hello Robin,
It's encouraging that you are following the comments of the members very closely and seriously—it gives a sort of 'incentive' to those who respond to such threads.
Coming to your new details, just give these comments a thought.
## 3. What makes things worse is when they receive their low results in evaluation, they tend to revolt.
Comment: Don't you notice any connection between your Points 1 and 3? Basically, that's one way of conveying that they weren't taken into confidence when the grading was made. I suggest devising a way to take their inputs too when grading—but let it be clear to them that the final word is YOURS, since taking inputs doesn't mean allowing them to decide their own ratings. This method is a double-edged sword—it cuts both ways, if not handled properly. If the rules don't permit you to involve them in the process before you send your report, find ways to do it informally.
## 4. There are existing incentives given by the company for top-performing individuals, but it seems they don't care.
Comment: You will be a better judge of this, but I have a feeling that YOU are left with a baby which was spoiled earlier before your entry into this group—maybe the earlier boss mishandled the scene, and you are facing the flak. Just look out for signs from this perspective. If indeed true, frankly you have a much simpler task at hand, since you already have an indirect/intangible benchmark to cross after which the team attitude ought to normalize.
Regards,
TS
From India, Hyderabad
Acknowledge(0)Amend(0)
It's encouraging that you are following the comments of the members very closely and seriously—it gives a sort of 'incentive' to those who respond to such threads.
Coming to your new details, just give these comments a thought.
## 3. What makes things worse is when they receive their low results in evaluation, they tend to revolt.
Comment: Don't you notice any connection between your Points 1 and 3? Basically, that's one way of conveying that they weren't taken into confidence when the grading was made. I suggest devising a way to take their inputs too when grading—but let it be clear to them that the final word is YOURS, since taking inputs doesn't mean allowing them to decide their own ratings. This method is a double-edged sword—it cuts both ways, if not handled properly. If the rules don't permit you to involve them in the process before you send your report, find ways to do it informally.
## 4. There are existing incentives given by the company for top-performing individuals, but it seems they don't care.
Comment: You will be a better judge of this, but I have a feeling that YOU are left with a baby which was spoiled earlier before your entry into this group—maybe the earlier boss mishandled the scene, and you are facing the flak. Just look out for signs from this perspective. If indeed true, frankly you have a much simpler task at hand, since you already have an indirect/intangible benchmark to cross after which the team attitude ought to normalize.
Regards,
TS
From India, Hyderabad
Acknowledge(0)Amend(0)
The above points given by Mr. Skhadir are nice... Additionally, I'm willing to add some more points as below:
Always make a unique identity that helps to get the work done from the staff. Make sure that you are also one of them to achieve the targets set by your higher officials.
Try to encourage the workers with small gifts if they bring any important quality issues.
Ensure with them that you are supporting them if any other department heads question their work, etc.
Always set targets with your subordinates who directly assign work to the workers. Be a part of that to give small ideas to increase the output. Regular awareness of the current scenario will be updated to help them understand the company's requirements.
I hope the above points will also be helpful in smoothly managing employees.
Regards,
Shiva
From India, Madras
Acknowledge(0)Amend(0)
Always make a unique identity that helps to get the work done from the staff. Make sure that you are also one of them to achieve the targets set by your higher officials.
Try to encourage the workers with small gifts if they bring any important quality issues.
Ensure with them that you are supporting them if any other department heads question their work, etc.
Always set targets with your subordinates who directly assign work to the workers. Be a part of that to give small ideas to increase the output. Regular awareness of the current scenario will be updated to help them understand the company's requirements.
I hope the above points will also be helpful in smoothly managing employees.
Regards,
Shiva
From India, Madras
Acknowledge(0)Amend(0)Looking for something specific? - Join & Be Part Of Our Community and get connected with the right people who can help. Our AI-powered platform provides real-time fact-checking, peer-reviewed insights, and a vast historical knowledge base to support your search.
How to handle.doc
How to handle M&A.pdf