No Tags Found!


tgpenney@gmail.com
11

Some times we forget what we are using at work

Corrosives are so commonly used in industry that, like many hazardous materials, they often aren't given much thought. Knowing their properties helps ensure that they are handled and stored safely, minimizing the potential for harm to personnel and the environment.

The Scale

The activity, or "power," of hydrogen ions in a solution is what is commonly referred to as pH. The pH of a liquid is gauged on a scale of 1 to 14, with a pH of 1 being very acidic, 7 being neutral and 14 being very caustic.

The Environmental Protection Agency (EPA) defines a corrosive liquid as an aqueous solution with a pH less than or equal to two, or greater than or equal to 12.5; or a liquid that corrodes steel at a rate greater than 6.35 mm per year at 130°F. (40 CFR 261.22)

It is important, however, to look at all of the characteristics of a material when making a hazard determination and creating safety plans. For example, carbonated colas typically have a pH of 2.5. A 35% hydrogen peroxide solution has a pH of 3.5. Although the peroxide solution has a pH closer to neutral, it is likely to cause greater damage if it is not stored and handled properly.

Everyday Use

Batteries, bleach, and even fruit juices are examples of corrosive materials commonly found in homes, and often without incident. In commercial and industrial facilities, two examples of corrosive materials are etching solutions and water treatment chemicals. Listed below are more corrosives and their everyday uses.

Common Acids

Common Uses



Hydrochloric Acid

Phosphoric Acid

Sulfuric Acid

Water treatment, etching, metal cleaning

Rust-proofing metals, soft drink manufacturing

Batteries, electroplating



Common Bases

Common Uses



Sodium Bicarbonate

Sodium Hydroxide

Sodium Hypochlorite

Fire extinguishers, antacids, pharmaceuticals

Water treatment, etching and electroplating

Disinfecting, water purification



Safety

Knowing the properties of a solution, including the pH, helps determine what precautions will be necessary to protect employees from harm. This goes beyond gloves and goggles, however — safety training should include proper storage and handling as well as emergency response procedures and proper disposal of spent materials.

Because corrosive materials can harm both workers and the environment, both the Occupational Safety and Health Administration (OSHA) and EPA have regulations requiring preparedness and training.

OSHA's Hazard Communication Standard (29 CFR 1910.1200) requires employers to evaluate workplace hazards and develop plans and procedures to protect employees from those hazards.

Information about the proper personal protective equipment (PPE) and handling of a liquid can be found on the Material Safety Data Sheet (MSDS). Other resources are the chemical manufacturer and safety suppliers. Some chemicals and processes are also subject to additional OSHA regulations to further ensure safety.

The EPA governs air, water and land resources; therefore several environmental regulations may apply to the material.

Storage

Proper storage involves not only checking containers to make sure there aren't any leaks, but also making sure that they are not placed in areas where they could come in contact with other chemicals that will cause an adverse reaction.

Although most facilities don't have the luxury of unlimited storage space, "making room" to store incompatible materials in separate areas can help avoid problems later. Training material handling personnel on why it is important to take the time to put materials in designated areas will also help ensure safety.

Spill containment pallets are another option to aid in storage. In the event of a leak while containers are in storage, the spill will be contained in the sump of the pallet, avoiding slip and fall hazards, costly fines if the material enters a drain, and possible chemical reactions with other materials in the area.

Handling

Transferring corrosive materials for use in various processes is a common cause of injury and spills. During transfer, fittings sometimes come loose, and hand pumps are notorious for consistent small drips.

Storing eyewash stations and drench showers, can also provide quick help for employees who may become injured by corrosives.

Battery recharging stations are another common area where corrosive liquids are handled. Stocking PPE, having a drench shower and stocking spill response materials in this area will also help increase safety and help comply with OSHA battery charging station regulations [29 CFR 1910.178(g)].

Double Checking

When hazardous materials are handled on a daily basis, it is sometimes easy to forget their hazards. Revisiting safety guidelines and double checking storage and handling procedures can help ensure that everyone stays safe.

From Canada, Calgary
tgpenney@gmail.com
11

Great tan line could it be a skin disease

Are your workers at risk read on

Working in construction can be hazardous to your skin. Construction materials as well as outdoor conditions take their toll. Problems range from irritations to skin cancer.

Some construction materials can cause serious health problems. They can produce allergic reactions, create skin irritations that become life-threatening, produce burns that can put you in the hospital, or seep through your skin and make you sick.

For some people, reactions to the even the smallest amount of materials can be so severe that they need to change careers.

Harmful Agents

Certain construction materials produce skin irritations called contact dermatitis. Symptoms include red, itchy, scaly skin or painful burns, ulcers, and rashes like acne. Some materials that can hurt your skin include:

* Wet cement

* Some cement dusts

* Lime

* Metalworking fluids

* Some paints

* Adhesives

* Epoxy resins

* Alcohols

* Toluene

* Turpentine

* Xylene

Also, pitch and coal tar can cause skin cancer.

What You Can Do

Simply washing your hands is not enough. Caution must be used if you work with hazardous construction materials. You should clean your skin with a mild, non-abrasive soap. Don't use solvents such as alcohol, mineral spirits, turpentine, and limonene. Solvents can irritate your skin and make you sick. It is much healthier to use mineral oil or vegetable oil in combination with soap and water. Use a liquid soap instead of a bar.

When working with caustic materials, such as lime or wet cement, use a pH neutral soap. You can actually hurt your hands if you use a harsher soap.

Healthy Hand Tips

Use the following general precautions to protect your hands:

* After work, wash with soap, rinse with water, and dry your hands with a clean cloth or paper towel.

* Follow the initial cleaning with mineral oil, petroleum jelly, or oil-based lotions, but avoid lotions that have lanolin, limonene (citrus solvent), or perfumes.

* When using work gloves, make sure your hands and the insides of the gloves are clean and dry before you put them on. (If your hands have any of the harsh materials on them when you put on gloves, you can make your skin problems worse.)

* Always use the right gloves for the job. Some gloves will not protect you from some of the materials or protect you for a whole work shift.

* See a doctor if you develop a skin problem that won't go away.

Working Outdoors

Before working outdoors, always apply a sunscreen to the skin areas that will be exposed during your work shift, even if you have dark skin. Make sure your hands and skin are clean before you put on sunscreen.

Also, wear a long-sleeved shirt. This will not only protect your skin from sunburn, but it protects against harmful materials, too.

Caring for your Clothes

Try not to get your clothes wet with cement or other harsh materials. When you work with hot asphalt, do not wear synthetic materials like polyesters or nylon -- they will melt and burn the skin if they touch the asphalt.

At home, don't wash your work clothes with any non-work clothes. If you do, you risk exposing your good clothes and your family's clothes to the harmful materials.

From Canada, Calgary
tgpenney@gmail.com
11

A little first aid in 2011 goes a long

Adult, Child & Infant CPR step sequence for CPR trained "bystander" rescuers will change from "A-B-C" (Airway, Breathing, Chest compressions) to "C-A-B" (Chest compressions, Airway, Breathing) for adults and pediatric patients (children and infants, excluding newborns). American CPR has implemented C.A.R.E. CPR™ as shown below - easier to learn & remember!

Defibrillation and use of AEDs remains a vital part of the lifesaving sequence.

Also applies to Advanced/Healthcare CPR.

Bystander / One rescuer Adult, Child & Infant CPR will no longer include the step to "Look, Listen and Feel"

Also applies to Advanced/Healthcare CPR.

A compression rate of 100+ per minute.

Also applies to Advanced/Healthcare CPR.

Adult chest compression depth: push down on the adult breastbone at least 2 inches (5 cm).

Also applies to Advanced/Healthcare CPR.

"Don't Stress... Compress!"™

All trained rescuers should provide chest compressions for victims of cardiac arrest. In addition, if the trained rescuer is able to perform rescue breaths, compressions and breaths should be provided in a ratio of 30 compressions to 2 breaths, averaging 100+ compressions per minute.

But... If a trained rescuer cannot perform the rescue breaths, or a bystander is not trained in CPR, the bystander should provide compression-only CPR for the adult victim who suddenly collapses, with 100+ rapid and firm compressions in the center of the chest.

Whenever available, follow the directions of the EMS/911 dispatcher.

As always, a rescuer should relinquish care to any better prepared or trained rescuer, while remaining to assist and assure quality of care.

C.A.R.E. CPR™ explains in easy-to-understand terms the most current 2010 CPR Guideline Updates.

C.A.R.E.™ stands for Compress, Airway, Rescue breathing, External defibrillation. American CPR training is way ahead of other national safety organizations in including these updated guidelines in both our instruction and our class materials.

In the updated C.A.R.E. CPR™ sequence, chest compressions come first, and rescue breathing is only slightly delayed for trained bystanders. While most instructors will continue to teach full CPR, including the rescue breaths which help supply oxygen to the blood, "Compression-Only" CPR will be covered as well, to address the participants' right to know the most current information.

From Canada, Calgary
raghuvaran chakkaravarthy
497

Dear sir,
Thanks for your CPR update.I dont have a time to reading this update will take print out view in my room then put my commands. . .
Very Thanks for your useful update. . .
Keep on touch. . .

From United States, Fpo
tgpenney@gmail.com
11

Why didnt he hear what the supervisor said --- simple he couldnt he was deaf from long term hearing loss on the jobsite

The results of audiometric tests are an important part of efforts to conserve and protect workers' hearing. Because they check a worker’s hearing ability from year-to-year, hearing loss can be identified and dealt with properly and promptly. Have all affected employees' hearing tested periodically, when they are transferred to a noisy work environment, or when they are exposed to noise levels that may be dangerous to their hearing.

Engineering Controls Can Help

If the noise level in a work area is too high, actions must be taken to reduce that noise. These steps might include:

• Placing noisy machinery in a separate area away from as many workers as possible.

• Placing machinery on rubber mountings to reduce vibration.

• Using sound-absorbing acoustical tiles and blankets on floors, walls and ceilings.

• Arranging work schedules to cut down on the time each worker spends in a noisy area.

Choosing the right hearing protection

When engineering controls are not enough to reduce the hazards, 29 CFR 1910.95(i) requires employers to supply hearing protection "to all employees exposed to an 8-hour time-weighted average of 85 decibels or greater." There are several different types of hearing protection that can be used, including:

• Expandable foam plugs — made of a formable material designed to expand and conform to the shape of each person’s ear canal.

• Pre-molded, reusable plugs — made from silicone, plastic, or rubber and are manufactured as either "one-size-fits-most" or are available in several sizes.

• Canal caps — often resemble earplugs on a flexible plastic or metal band, which is convenient because they can be inserted or taken out quickly.

• Earmuffs — block out noise by completely covering the outer ear and come in many models to fit most people.

Unfortunately, some equipment, like saws and punch presses, cannot be made to operate any quieter, so it's up to the employer to evaluate working conditions, take the steps necessary to reduce noise levels, and provide proper hearing protection if required.

From Canada, Calgary
tgpenney@gmail.com
11

Safety Inspections either written or in electronic style the key is are they getting done what is the style and what information is being recorded

These are some common problems that safety managers face every day.

Asset Identification

The first step in safety compliance is identifying a piece of equipment. Traditionally, serial numbers are visually read by inspectors. Serial numbers can be read and recorded incorrectly or become dirty and unreadable. If an asset is improperly identified, subsequent inspections, no matter how properly done, are useless.

Inspection Scheduling

Organizations have thousands of pieces of equipment, from rigging to fall protection. Some equipment requires daily inspections, some need annual inspections and some require recertification. Managing this process quickly becomes unmanageable.

Compliance Guesswork

Safety compliance is a complicated matter. Knowing which inspection criteria to use on which piece of equipment is a nightmare. There are multiple government regulations, corporate policies and manufacturer’s suggestions that a safety manager has to keep in mind.

Time Consumption

Identifying an asset, figuring out which inspection criteria is appropriate, recording the inspection, and then storing the inspection is an extremely time consuming process. An inspection doesn’t stop on the field, the backend administration and storage is where a bulk of the time is spent.

Unmanageable Paperwork

To properly manage safety compliance, a safety audit trail must be maintained for each and every piece of equipment. This includes internal inspections, third party inspections, certifications and manufacturer’s documentation. Managing all this paperwork from different parties, storing and filing it properly becomes unmanageable very quickly. One the biggest problem is presenting all this paperwork to a government auditor or, even worse, during an accident investigation. Not having a quick way t access and view the status of your safety data is a huge problem inherent to traditional ISCM.

The Solution: Electronic Inspection and Safety Compliance Management

Like with many traditional processes, software is revolutionizing the way safety compliance is managed. Companies are now using new electronic methods to completely automate safety compliance. Electronic inspection and safety compliance management is a paradigm shift. The vast difference between email and mail is the difference that electronic ISCM provides organizations over traditional methods. The following sections will walk through how traditional safety compliance management is changed using electronic ISCM.

Identification – Using electronic identification

The first step in safety compliance is asset identification. Instead of reading a serial number, assets are now being tagged with either barcodes or radio frequency identification (RFID) chips. This allows assets to be identified without human intervention, completely electronically. Not only are you saving time when identifying a piece of equipment, all human error is eliminated.

Inspection – Using mobile computers

The basic step in all safety management is an inspection. Instead of using a clipboard and pen, handheld computers and mobile phones are being used to completely digitize the process. A handheld computer scans an electronic tag and the asset is identified. Right away the handheld will display the inspection history and if the asset is safe to use. If an inspection is to be done, the software on the handheld will tell the inspector exactly which inspection standard to use and guide the user through the process. A user literally clicks through inspection criteria with minimal, if not zero, keyboard input. Not only is the entire inspection process paperless, all the compliance guesswork is eliminated. The mobile software guides you through the entire inspection and safety compliance process for that piece of equipment.

Safety Documentation – Using the Web

Being able to present safety data in a timely manner and store it without backend administration is one of the key features to an electronic ISCM system. After an inspection is conducted with a mobile computer, all the data is automatically transferred to a secure database or website either in real time or when docked and synced. All documentation, certifications and reports are generated automatically. All backend administration, scanning of paper work and manual data entry is completely eliminated. You never have to worry about keeping backups of your documents or whether they were accurately recorded. Possibility of human error is drastically reduced as is any duplication of work.

From Canada, Calgary
tgpenney@gmail.com
11

Accidents at work are you thinking outside he box are you constantly aware of the risks and managing those risks to prevent the next incident

Accidents at work

Don't become one of these statistics. Be aware of the dangers at work. And protect yourself by knowing your rights and knowing the responsibilities of your employer. Make sure you are getting the proper insurance that would cover you in case of an accident at work. Here are some of the most common occupational hazards and what you can do to protect yourself.

Chemical Hazards

Health hazards can arise from exposure to a wide variety of chemical substances in the workplace. These dangers can come in the form of solids, liquids, vapors, gases, dust, fumes, and corrosives. They can be inhaled, ingested, or absorbed into the body. Whether you work in an office building, a manufacturing plant, or on a farm, chemical hazards could pose a serious health risk. It is your employer's responsibility to keep the threat to safe levels and provide appropriate safety protection.

Fire

Any workplace is susceptible to the risk of fire. Know where fire extinguishers are stored and participate in company fire drills. Most importantly, know your emergency escape route. It could save your life.

Over-exertion and Stress

You have the most personal control over preventing this occupational hazard. "Repetitive use injury" is the fastest growing type of injury in the workplace. It is caused by repeating the same actions or maintaining the same position for long periods of time. These injuries involve the hand, wrist, forearm, shoulder, and back. They result from a wide range of occupations, including use of a computer keyboard (often leads to carpal tunnel syndrome), product packaging, sewing, heaving, scrubbing, electronic assembly, stamping, sorting, and carrying. Stress, both physical and emotional, is a major factor.

Electrical Hazards

Electrical hazards can be prevented by avoiding the use of worn or frayed power cords. Keep a safe distance (at least 10 feet) from energized power lines. Ensure that power tools and electrical equipment are grounded and in good working order before use.

Accidental Falls and Flying Objects

Falls from high places are a common hazard in certain jobs, such as construction and work on cellular towers. Use a personal harness or install guardrails or a safety net to minimize injury. Protect yourself from flying, falling, or collapsing objects by wearing a hard hat or other safety gear.

Confined Spaces

Explosion, poisoning, asphyxiation, and extreme temperatures are hazards associated with working in confined spaces, such as a sewer, tank, vault, or other compartment. Ensure your area is properly venthilated and reduce the risk.

From Canada, Calgary
tgpenney@gmail.com
11

Think about it guys what really came first

Is it prevention or being prevented

Chicken or Egg Engineering Controls or PPE which came first

Too often, employers provide personal protective equipment (PPE) as the primary method of protecting employees; and PPE is an important and practical defense against workplace hazards. But according to a variety of OSHA regulations, it should be the last line of defense.

Engineering or administrative controls must be considered first when workplace hazards are evaluated, and must be implemented before PPE is issued to employees.

Here are three common hazards and solutions to consider.

Noise Exposure

In the occupational noise exposure standard, OSHA states: "When employees are subjected to sound exceeding those listed in Table G-16, feasible administrative or engineering controls shall be utilized."[29 CFR 1910.95.] Table G-16 lists decibel limits for various noise exposure durations.

When evaluating appropriate engineering or administrative controls for noise, here are some controls to consider:

• Move employees away from the noise-producing equipment

• Place noisy machinery in an area away from as many workers as possible

• Place machinery on rubber mountings to reduce vibration

• Use sound-absorbing acoustical tiles and blankets on floors, walls and ceilings

• Arrange work schedules to reduce the time each worker spends in a noisy area

Flying Debris Hazards

Although many machines can be fitted with guards, hazards from flying debris can still be common with many manufacturing processes. 29 CFR 1910.212 states that "One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.”

Examples of guarding methods include barrier guards, two-hand tripping devices, electronic safety devices, etc. Some steps that may be considered include:

• Using barriers or ropes to keep employees out of unauthorized areas near machinery and moving parts

• Establishing inspection schedules and preventive maintenance to ensure that machinery is always in working order

• Encouraging employees to maintain housekeeping schedules

• Training employees in the proper use of machinery and guards

Respiratory Hazards

Dusts, mists, vapors, gases and fumes are all examples of potential respiratory hazards. Like many OSHA regulations, 29 CFR 1910.34 also encourages engineering controls as a first step in mitigating these hazards. When considering implementing engineering or administrative controls to help control respiratory hazards, consider these steps:

• Install ventilation systems to help control and/or eliminate air contaminants

• Enclose or confine operations to avoid employee exposure

• Substitute chemicals that are less hazardous

Of course, the implementation of engineering or administrative controls won’t always eliminate or replace the use of PPE. But the combination of engineering or administrative controls and the use of PPE can help provide the best protection for employees.

From Canada, Calgary
tgpenney@gmail.com
11

Wait a second I have to go to the washroom

On second thought I have to go to the caretakers room first before I can use it

How clean are your staff washrooms and toilet areas are they making your workers sick. It is not always about slips trips and falls or walking under suspended loads or if it will blow up

Sometimes the risks are less than a seat away from you

Poor bathroom hygiene can present a health risk to the entire household. When not cleaned properly and often, a dirty bathroom becomes a breeding ground for bacteria and germs that spread illness through the house.

Each family member can play their part in keeping the bathroom clean to prevent germs from spreading. It involves keeping themselves clean and cleaning up after themselves. The regimen is not just healthy; it's considerate. The dirt and germs you leave behind can linger and spread illness to other family members.

Personal Hygiene

Your own personal hygiene plays a large part in improving bathroom hygiene. Like the bathroom, your mouth and hands are breeding grounds for bacteria. Overall bathroom cleanliness begins when you clean yourself. Replace your toothbrushes every three months. Don't let your dirty toothbrush hang in the holder with your family’s toothbrushes. And never share a toothbrush with anyone. That's the quickest way to spread infections.

Wash your hands thoroughly each time you use the bathroom. Germs spread quickly by touch. Instruct all family members to wash their hands with warm, soapy water after using the toilet. Educate young children early about the importance of toilet hygiene.

Use disposable towels to dry your hands instead of a cloth towel that everyone would use. By using disposables, you'll be throwing away germs instead of spreading them. Communal towels contain bacteria and viruses that cause illness.

Bath towels should be changed and washed regularly. Hang them up to dry after use; the longer they remain wet, the more germs will collect on the towel.

Surfaces

All bathroom surfaces should be cleaned regularly. These include the door handle, faucets, toilet, sink, floor and shower/bathtub.

Shake water from the curtain after showering to prevent buildup of mold and mildew. Always leave the curtain open so water evaporates. Clean the curtain liner once a month.

Occasionally remove your showerheads and soak them overnight in vinegar or a commercial cleanser. This removes the build-up and dirt that clogs the head and contaminates the shower water.

Be especially careful when cleaning the toilet, especially if a family member is sick. All toilet parts should be cleaned regularly including the seat, rim, lid, bowl and flushing handle. Always wipe the toilet seat with tissue before and after using.

Here are some other tips to help reduce bacteria and prevent contamination:

* Never share razors

* Wear shoes or slippers in the bathroom to prevent contact with germs on the floor, which can cause conditions such as athlete's foot

* Use toilet paper or paper towels to wipe up spills and water

* Keep the bathroom dry; bacteria breeds in moist environments

From Canada, Calgary
raghuvaran chakkaravarthy
497

Dear all, Another one from myside — Ladder Safety Tips — Happy Pongal to all. . .
From United States, Fpo
Attached Files (Download Requires Membership)
File Type: zip Ladder Safety Tips.zip (3.91 MB, 260 views)

Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.






Contact Us Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2024 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.