Dear All,
I want to know about stability certificate for factory..
What is process to take it and from which department??
Kindly share your knowledge and detail about stability certificate.
Regards,
Faruk Shaikh+91-9998022889
+91-9974768786
From India, Mumbai
33I want to know about stability certificate for factory..
What is process to take it and from which department??
Kindly share your knowledge and detail about stability certificate.
Regards,
Faruk Shaikh+91-9998022889
+91-9974768786
From India, Mumbai
Dear Faruk Shaikh,
This certificate of stability is to be issued by the competent person in the prescribed form as provided by the applicable State Factory Rules & is required to be submitted to the State Chief Inspector of Factories.If your appropriate Govt. is state government then go through your state Factory Rules to know more about this matter. You can also approach your area Inspector of Factories, Labour Department for your query.
R.N.KHOLA
Welcome Skylark Associates
From India, Delhi
This certificate of stability is to be issued by the competent person in the prescribed form as provided by the applicable State Factory Rules & is required to be submitted to the State Chief Inspector of Factories.If your appropriate Govt. is state government then go through your state Factory Rules to know more about this matter. You can also approach your area Inspector of Factories, Labour Department for your query.
R.N.KHOLA
Welcome Skylark Associates
From India, Delhi
Hello Farukh Shaikh:
As far as my experience goes, first time the Stability Certificate can be got from your architect/builder who constructed your factory. There is a specific format. This has to be furnished every five years to Deptt of Industrial Safety & Health or earlier with every modification/change you make to the building.
Subsequently, you can get it from any other registered Structural Engineer/Civil Engr.
Regards,
Kalpana Iyer
From India, Pune
As far as my experience goes, first time the Stability Certificate can be got from your architect/builder who constructed your factory. There is a specific format. This has to be furnished every five years to Deptt of Industrial Safety & Health or earlier with every modification/change you make to the building.
Subsequently, you can get it from any other registered Structural Engineer/Civil Engr.
Regards,
Kalpana Iyer
From India, Pune
can body please provide a sample format of the stability certificate. Akhilesh Singh Delhi NDPL
From India, Pune
From India, Pune
Dear NDPL,
This is to inform you that format of the stability certificate is provided by the applicable Factory Rules & therefore first examine which State/ Central Factory Rules are applicable in your case & then have the format from those applicable Rules.
R.N.KHOLA
Welcome Skylark Associates
From India, Delhi
This is to inform you that format of the stability certificate is provided by the applicable Factory Rules & therefore first examine which State/ Central Factory Rules are applicable in your case & then have the format from those applicable Rules.
R.N.KHOLA
Welcome Skylark Associates
From India, Delhi
Dear R.N Khola Sir, thanks for your response . i am working in gas based thermal power plant in delhi , hence The Delhi Factory rule 1950 is applicable over us. kindly advise.
From India, Pune
From India, Pune
Dear Members,
As per my information :
MODEL RULES UNDER THE FACTORIES ACT, 1948 (Corrected upto 31-3-1987)
CHAPTER I
5. Certificate of Stability.-
(1) No manufacturing process shall be carried on in any building of a factory constructed, reconstructed or extended, or in any building which has been taken into use as a factory or part of a factory until a certificate of stability in respect of that building in the form given below has been sent by the occupier or manager of the factory to the Chief Inspector, and accepted by him.
***A Form of Certificate of Stability is as below.
Form of Certificate of Stability
1. Name of the Factory :
2. Village, town and district
in which the factory is situated :
3. Full postal address of the factory. :
4. Name of the occupier of the factory :
5. Nature of manufacturing process to be carried on in the factory :
6. Number of floors on which workers will be employed :
I certify that I have inspected the building/buildings, the plans of which have been approved by the Chief Inspector in his letter No.... ............ dated ......... and examined the various parts including the foundations with special reference to the machine, plant etc., that have been installed. I am of the opinion that the building/buildings which has/have been constructed/reconstructed/extended/taken into use is/are in accordance with the plans approved by the Chief Inspector in his letter mentioned above, that it is/they are structurally sound and that its/their stability will not be endangered by its/their use as factory/part of a factory for the manufacture of .......... for which the machinery, plant, etc. installed are intended.
Signature ..............................
Qualifications .........................
Address ...............................
Date .................................
If employed by a company or association, )
name and address of the company or )
association )
(2) The Certificate of Stability referred to in sub-rule (1) shall be signed by a competent person.
Regards.
Jawed Alam
From India, Dhanbad
As per my information :
MODEL RULES UNDER THE FACTORIES ACT, 1948 (Corrected upto 31-3-1987)
CHAPTER I
5. Certificate of Stability.-
(1) No manufacturing process shall be carried on in any building of a factory constructed, reconstructed or extended, or in any building which has been taken into use as a factory or part of a factory until a certificate of stability in respect of that building in the form given below has been sent by the occupier or manager of the factory to the Chief Inspector, and accepted by him.
***A Form of Certificate of Stability is as below.
Form of Certificate of Stability
1. Name of the Factory :
2. Village, town and district
in which the factory is situated :
3. Full postal address of the factory. :
4. Name of the occupier of the factory :
5. Nature of manufacturing process to be carried on in the factory :
6. Number of floors on which workers will be employed :
I certify that I have inspected the building/buildings, the plans of which have been approved by the Chief Inspector in his letter No.... ............ dated ......... and examined the various parts including the foundations with special reference to the machine, plant etc., that have been installed. I am of the opinion that the building/buildings which has/have been constructed/reconstructed/extended/taken into use is/are in accordance with the plans approved by the Chief Inspector in his letter mentioned above, that it is/they are structurally sound and that its/their stability will not be endangered by its/their use as factory/part of a factory for the manufacture of .......... for which the machinery, plant, etc. installed are intended.
Signature ..............................
Qualifications .........................
Address ...............................
Date .................................
If employed by a company or association, )
name and address of the company or )
association )
(2) The Certificate of Stability referred to in sub-rule (1) shall be signed by a competent person.
Regards.
Jawed Alam
From India, Dhanbad
Dear Jawed Alam , thanks for this valueable information. with a request to our senior memebrs please kindly give the standard format as preascribed The Delhi Factory Rule 1950. Akhilesh Singh
From India, Pune
From India, Pune
Dear R N Khola,
I want to know that is there any correlation of stability certificate and factory licence.
if we applied for stability certificate for 250 works and applied for 450 workers in form 2a for factory licence.
arvind
From India, Lucknow
I want to know that is there any correlation of stability certificate and factory licence.
if we applied for stability certificate for 250 works and applied for 450 workers in form 2a for factory licence.
arvind
From India, Lucknow
Dear All,
I am Consulting Structural Engineer & registered Chartered Engineer. I am having authority to issue the Stability Certificate as fer factory act.
So, please contact me for Stability Certificate.
Thanks & Regards
Suyog V. Tikle
Chartered Engineer
ME (Structures), PGDBA (HR), BE (Civil Engg.), D.C.E.
Office Address.- Block No.- 17, 3rd Floor, Above MacDonald\'s,
Ripplez Mall, Opposite Shiv Sena Shakha, Sector- 7, Airoli,
Navi Mumbai - 400708
Mob. No.- +91 9860219373
+91 9769864249
EmailID- suyog.ssdc@gmail.com
From India, Mumbai
I am Consulting Structural Engineer & registered Chartered Engineer. I am having authority to issue the Stability Certificate as fer factory act.
So, please contact me for Stability Certificate.
Thanks & Regards
Suyog V. Tikle
Chartered Engineer
ME (Structures), PGDBA (HR), BE (Civil Engg.), D.C.E.
Office Address.- Block No.- 17, 3rd Floor, Above MacDonald\'s,
Ripplez Mall, Opposite Shiv Sena Shakha, Sector- 7, Airoli,
Navi Mumbai - 400708
Mob. No.- +91 9860219373
+91 9769864249
EmailID- suyog.ssdc@gmail.com
From India, Mumbai
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.
How to start factory in pondicherry 1.doc