@ Sudhir Agarwal
Dear Sir
Thanks for your valuable advise...
So will advice in future when comes to Safety footwear as follows:
Double Sensity Slip Resistant PU Sole, Steel Toe Cap with EN Certified one for general use, for most of the employees
&
Nitrile Rubber Sole, Steel Toe Cap with EN Certified one mainly for workers in Hot areas.
Now what my question is which safety footwear will be for those who dealing with Electricity... Electrical Engineers, Electriciains, Instrument Engineers and Technicians, Etc.? Di-electric foot wear? Whats the dofferance in this from normal safety footwear?
If the footwear is of CE marking, then who will be the issuing agency of the slip resistance certificate? And who will be the issuing agency in case IS approved footwear?
Keep on sharing your expertise with us...Thanks in advance...
From India
713Dear Sir
Thanks for your valuable advise...
So will advice in future when comes to Safety footwear as follows:
Double Sensity Slip Resistant PU Sole, Steel Toe Cap with EN Certified one for general use, for most of the employees
&
Nitrile Rubber Sole, Steel Toe Cap with EN Certified one mainly for workers in Hot areas.
Now what my question is which safety footwear will be for those who dealing with Electricity... Electrical Engineers, Electriciains, Instrument Engineers and Technicians, Etc.? Di-electric foot wear? Whats the dofferance in this from normal safety footwear?
If the footwear is of CE marking, then who will be the issuing agency of the slip resistance certificate? And who will be the issuing agency in case IS approved footwear?
Keep on sharing your expertise with us...Thanks in advance...
From India
Dear Dipil,
For Electricians who deal with live electricity should wear Vulcanised rubber sole footwear. Please ensure that such a footwear has no metal in sole complex, including steel mid sole. Normal safety footwear if we presume it to be antistatic will protect you up to 300 volts while rubber footwear which is as per EN 50321, will provide protection from 600 volts to 1000 volts. Further this level of protection get reduced with wearing of sole.
For technician working in Electronic industry, ESD footwear is preferred.
CE marking issuing authority is in UK. Lot of labs like, SATRA, Intertek, SGS issue slip resistance test certificate . In India FDDI also issue slip resistance test certificate.
Sudhir
From India, Kanpur
For Electricians who deal with live electricity should wear Vulcanised rubber sole footwear. Please ensure that such a footwear has no metal in sole complex, including steel mid sole. Normal safety footwear if we presume it to be antistatic will protect you up to 300 volts while rubber footwear which is as per EN 50321, will provide protection from 600 volts to 1000 volts. Further this level of protection get reduced with wearing of sole.
For technician working in Electronic industry, ESD footwear is preferred.
CE marking issuing authority is in UK. Lot of labs like, SATRA, Intertek, SGS issue slip resistance test certificate . In India FDDI also issue slip resistance test certificate.
Sudhir
From India, Kanpur
@ Sudhir Agarwal
Dear Sir
Thanks for your valubale reply...
One more question, if the footwear to be given to all employees expect the electrical persons, can we have to always suggest one with steel mid sole or not?
Once again thanks and keep on share your expertise with us...
From India
Dear Sir
Thanks for your valubale reply...
One more question, if the footwear to be given to all employees expect the electrical persons, can we have to always suggest one with steel mid sole or not?
Once again thanks and keep on share your expertise with us...
From India
Dear Dipil,
Its advisable to go for antistatic footwear for all employees except electricians.
There is no issue in having steel mid sole in Antistatic footwear but it cannot be in a Electrical shock Resistant footwear.
Steel Mid sole is required only when you need penetration resistance.
Even in case you require penetration resistance insert for electricians you can ask for Kevlar mid sole.
We are making such a footwear but it is little expensive.
Sudhir
From India, Kanpur
Its advisable to go for antistatic footwear for all employees except electricians.
There is no issue in having steel mid sole in Antistatic footwear but it cannot be in a Electrical shock Resistant footwear.
Steel Mid sole is required only when you need penetration resistance.
Even in case you require penetration resistance insert for electricians you can ask for Kevlar mid sole.
We are making such a footwear but it is little expensive.
Sudhir
From India, Kanpur
@ Sudhir Agarwal
Dear Sir
Thanks for your continous support and the answers given... We are using Kevlar Shoes for those workers working in hot areas...
Once again thanks a lot for your reply's and keep on sharing your expertise with us...
From India
Dear Sir
Thanks for your continous support and the answers given... We are using Kevlar Shoes for those workers working in hot areas...
Once again thanks a lot for your reply's and keep on sharing your expertise with us...
From India
There is no need of Kevlar shoe for hot area. I understand that you mean it contain Kevlar mid sole.
Nitrile rubber sole footwear stitched with Kevlkar thread is best.
You must not forget that even if you protect foot with an appropriate footwear, what about other body part.
Therefore the temperature or heat contact test is done for one minute.
We have launched world renowned JCB safety footwear.
They are sensibly priced & I am attaching photo of the same.
They are all state of the art safety footwear.
Sudhir Agarwal
From India, Kanpur
Nitrile rubber sole footwear stitched with Kevlkar thread is best.
You must not forget that even if you protect foot with an appropriate footwear, what about other body part.
Therefore the temperature or heat contact test is done for one minute.
We have launched world renowned JCB safety footwear.
They are sensibly priced & I am attaching photo of the same.
They are all state of the art safety footwear.
Sudhir Agarwal
From India, Kanpur
Dear Sir
First of all sorry for a late replying.... Thanks for your nice explanation...
How we have to do this temperature or heat contact test? You were talking about footwear only or it's needed for full body?
Also how much temp. resistant this JCB Safety Footweqar?
Whether this can be advised for a normal worker for 8hours wearing and working? On normal conditions, not on hot areas?
From India
First of all sorry for a late replying.... Thanks for your nice explanation...
How we have to do this temperature or heat contact test? You were talking about footwear only or it's needed for full body?
Also how much temp. resistant this JCB Safety Footweqar?
Whether this can be advised for a normal worker for 8hours wearing and working? On normal conditions, not on hot areas?
From India
A good PU soled footwear resist 150 degree Celsius for one minute.
A Nitrile rubber sole footwear will resist 300 degree Celsius for one minute.
Its a heat contact test where a predetermined heated metal contact is applied to the sole for 60 seconds. Sole should not char or crack for a pass test.
Another important thing is the conduction of heat to the wearer. For this insole plays a very important role.
All the JCB footwear displayed as attachment here are excellent footwear for majority of industry except hot areas.
They are priced between Rs 900-1100 per pair & are CE marked.
They are class apart from we are getting in the market.
Sudhir Agarwal
From India, Kanpur
A Nitrile rubber sole footwear will resist 300 degree Celsius for one minute.
Its a heat contact test where a predetermined heated metal contact is applied to the sole for 60 seconds. Sole should not char or crack for a pass test.
Another important thing is the conduction of heat to the wearer. For this insole plays a very important role.
All the JCB footwear displayed as attachment here are excellent footwear for majority of industry except hot areas.
They are priced between Rs 900-1100 per pair & are CE marked.
They are class apart from we are getting in the market.
Sudhir Agarwal
From India, Kanpur
Prefer PU sole to PVC sole, though a bit costly PU is comfortable than PVC which is hard and heavy. Finally you can refer to IS:15298. Also ask for slip resiatnce test certificate. Finally your choice depends on the application you are looking for and the price range.
Regards
Santosh
Regards
Santosh
Dear Sir/Madam,
We are INVESTCOM INVESTMENT JSC.,in Viet Nam which specializing in manufacturing and exporting NATURAL RUBBER. We ensure to supply Natural rubber in various kinds with the high quality, best competitive prices, delivery on time and other best services.
We are looking for long and mutual beneficial business relationship with all partners over the world .
Specs as follow :
- Commodity: RSS3 , SVR3L, SVR10, SVR20,etc.
- Origin: Vietnam
- Quantity: 2000 Mts monthly
- Quality: Superior as per Vietnam Export Rubber Standard.
- Payment: 100% LC at sight irrevocable or T/T (30/70)
- Shipment: Prompt
We ensure that will offer you with the best price in the market from our manufacturing factory.
Should have any question, pls feel free to contact me via my email or skype ID: gia_chang88
We look forward to hearing from you soon.
Thanks and Best Regards
Bella
********************
INVESTCOM INVESTMENT JSC.,
Add: 1st Floor, VMT Building, Duy Tan St, Cau Giay Dist, Hanoi, Vietnam
Mobile: +84-9 66832808
Email:
Contact: Ms.Bella – Sales Executive
Skype: gia_chang88
From Vietnam, Hanoi
We are INVESTCOM INVESTMENT JSC.,in Viet Nam which specializing in manufacturing and exporting NATURAL RUBBER. We ensure to supply Natural rubber in various kinds with the high quality, best competitive prices, delivery on time and other best services.
We are looking for long and mutual beneficial business relationship with all partners over the world .
Specs as follow :
- Commodity: RSS3 , SVR3L, SVR10, SVR20,etc.
- Origin: Vietnam
- Quantity: 2000 Mts monthly
- Quality: Superior as per Vietnam Export Rubber Standard.
- Payment: 100% LC at sight irrevocable or T/T (30/70)
- Shipment: Prompt
We ensure that will offer you with the best price in the market from our manufacturing factory.
Should have any question, pls feel free to contact me via my email or skype ID: gia_chang88
We look forward to hearing from you soon.
Thanks and Best Regards
Bella
********************
INVESTCOM INVESTMENT JSC.,
Add: 1st Floor, VMT Building, Duy Tan St, Cau Giay Dist, Hanoi, Vietnam
Mobile: +84-9 66832808
Email:
Contact: Ms.Bella – Sales Executive
Skype: gia_chang88
From Vietnam, Hanoi
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.
Share saving calculation.xls
5 How to submit the entries for Talent Share 2008.jpg