No Tags Found!

dipil
713

Dear All
When I search in net I found the following sentence in almost every site:
"It's not voltage that kills, its current!"
Without the existence of voltage current will not produce? So how can we justify the above... Both are required to kill a person, Current as well as voltage...
During my discussion with one person today I told the above sentence: "It's not voltage that kills, its current!"... But finally I not had been able to justify my answer...
Can 24V kill a person ? Normally we consider 24V supply as a Safe Voltage, but still is this 24 voltage can kill a person?
Can anyone come up with a solution to my query... Hope to look forward to get some solution on the above two queries...
Thanks in advance...

From India
boss2966
1168

Dear Mr. Dipil
Still I am unable to understand the Current, Voltage and Ampere. Eventhough the the Power supply is of 24 Volts if the ampere is more it will kill the person. (This was told by one electrical engineer - But I am unable to understand). There are many things in this world we are unable to understand. This also one among those things.
Let us look forward for the reply from our learned members.

From India, Kumbakonam
SANDY BEAR
1

Dear Dipil,
Kindly visit the following links.
Hope you can get satisfactory answer.
What kills people current or voltage
Which is kill the human voltage or current
Regards,
Sandy

From India, Lucknow
Trilochan_Joshi
Dilip,
Current never kills a person it's voltage . Think a situation you are hanging in air with the help of a Current wire. Current will move on your body but it will not kill because there is not voltage differences between your body parts . You can see the bird siting on current wire but they do not die .
Same if your body is touching earth or any other electricity conductor materials , it'll make voltage difference b/w your body parts and can lead death . So it's clear that voltage differences kill a person not current .
If the voltage differences is just 24 V it can't kill a person but affect harm
I hope it'll clear you query !! if not revert same here

From India, New Delhi
psdhingra
387

There are various criteria about causes of fatal effect of electricity, which are relevant to current, voltage, amperes and body resistence level of a human being. For the correct answer to yoru question, you may please try to check the following link that explains in brief different aspects about fatal effect of electric current:
Electric Current Needed to Kill a Human

From India, Delhi
bsgkrishna
9

Dear All,
The quantity of Current is the one that decides the type of damage caused to the human body.
But the quantity of current is decided by the voltage & resistsnce of the victim at the time of contact.
QUANTITY OF CURRENT FLOW DETERMINES THE SEVERITY of shock
1 milli amps - Skin tingling
9 milli amps - Starts Freezing of muscles
30 milli amps - Breathing difficulty
75 milli amps - Breathing stops
100 to 200 milli amps - Ventricular Fibrillation of Heart
BS Gopala krishna
,9731398860
EHS consultant , Bangalore

From India, Bangalore
asudhir17
1305

Dear Mr. Dipil,
Attached is a ppt which is self explainatory.
I was invited to Govt College of Polytechnic where I delivered this for the professors. (Train the trainer). This was drive under Industry / Government Institutes Partnership programme.
Thanks,
Sudhir

From India, Nasik
Attached Files (Download Requires Membership)
File Type: ppt Electrical_Safety_-_Govt_Polytechnic.ppt (573.0 KB, 330 views)

dipil
713

Dear Pon

I not think that this is a childish question... Cause if you just analyze the reply's given by our members also you can find the controversy... If you feels this is so childish question come up with answer supporting by technical explanations...

Again quoting the following sentence from another website... Can you just go through it and come up with your views...

Provided a much lower body resistance figure augmented by contact with a ring (a band of gold wrapped around the circumference of one's finger makes an excellent contact point for electrical shock) or full contact with a large metal object such as a pipe or metal handle of a tool, the body resistance figure could drop as low as 1,000 ohms (1 kΩ), allowing an even lower voltage to present a potential hazard:

E = IR

E = (20 mA)(1 kΩ)

E = 20 volts

Notice that in this condition, 20 volts is enough to produce a current of 20 milliamps through a person: enough to induce tetanus. Remember, it has been suggested a current of only 17 milliamps may induce ventricular (heart) fibrillation. With a hand-to-hand resistance of 1000 Ω, it would only take 17 volts to create this dangerous condition.

Be specific and try to give a positive response instead of just throwing negative comments... We are here to discuss issues and to bring out the best possible solution which will be beneficial to all... If you feel still it as a childish question please ignore and don't waste your precious time in replying...

From India
dipil
713

Dear All
Sorry for not responding to any of the reply’s... I will review and replying to all the replies after tomorrow... I am appearing to my exams and little bit busy in my studies... Thanks a lot to all for participation and giving excellent views...
I am very happy to see many reply’s to this thread...
Keep on sharing your expertise...

From India
boss2966
1168

But Mr. Gopala Krishna, in our markets the ELCBs are available, which are breaking the circuits only when the leakage is more than 30 milli amps.
Will it not make any damage to the life or parts of body of the victim.

From India, Kumbakonam
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.






Contact Us Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2024 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.