vineeth.krishna
Dear All,
I would like to have a clarity about TPI(Third party inspection) certificates for lifting tools 7 tackles. there are few situation i came across and actually want to know the correct answer for my concern.
My question to everyone here is: Does TPI required for Lifting tools and tackles (brought in less than a year) if they come with a manufacturer certificate.
I heard that the manufacturer also gets tested by a competent person before providing a manufacturer certificate.
vineeth.

From India, Bangalore
pon1965
604

The answer to your query is "YES"--------------------------------------------------------------------------------------
Pon

From India, Lucknow
dipil
713

Dear Mr. Vineeth
If the tools & tackles is come with a manufacturer certificate, then also you have to get the competent person certificate for the particular state where the tools is being used... Example a tool which is certified by the competent person in Maharashtra, that certificate is only having validity in that particular state & is not having validity to use in any other states...

From India
bsgkrishna
9

Dear Vineeth,
If the person signing the manufacturer's test certificate is a competent person recognised by the state factory inspectorate , then it is not necessary.
Other wise you must get a test certificate from competent person in the prescribed format before the first use. Failure to do so will be a non compliance of the legal requirement.
Best Regards,
Thanking You,
B.S.Gopala Krishna, BE (Elect) , DIS (CLI)
OM Sri Krishna Environment,Safety & Occupational Health Consultants
Lead assessor ISO14001/OHSAS 18001.
Mobile No:97313 98860
Residence NO:080 2348 5012
Bangalore 560079

From India, Bangalore
tvsrao@hbl.in
5

Dear All we can use the tools and tackles certificate of the manufacturer of any state in beginning only Regards ALAM 9676771014
From India, Hyderabad
lovevinayaga
Please confirm, if we use within the manufacture state....it is necessary to do the TPI for newly purchased to0ls & tackles..... Please provide the answer with valid proof.
From India, New Delhi
boss2966
1168

If the tools and tackles are purchased directly from the manufacturer and after installation the Manufacturer must certify for its working condition. But if you shift the same from one point to another place then for every shifting then TPI must invariably be obtained.
From India, Kumbakonam
Barath1098
Dear Mr. Vineeth,
As per Factories Act 1948-Section 29, any lifting machine/ lifting tackle used within the factory should be certified for use by a Competent Person. The validity of that certificate is 1 year max. If you have bought the said lifting tools/tackles within a year and if you have the manufacturer's test certificate containing certification by a competent person then separate certificate is not required. However if the manufacturer's certificate was issued over a year ago, then you must get it inspected and certified by a Competent person before putting it into use.
Regards
E.Barath

From India, Trichy
amiya-kumar-pujari
Yes,TPI is required. Thats why importance of TPI is there.
Is it new or old, either comes with Test certificate or not, that does not matter.
in which conditions it stored at mfg store, how it is transported, so before its taken for first use it should be tested by TPI competent person is required.

From India, Vadodara
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.





Contact Us Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2024 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.