The Implementation Plan: The following steps outline a process for implementing the Electrical SAFE Program. These steps are based on implementing a program in an organization with some form of existing electrical safety program. The actual steps, order, and effort will vary based on the organization and experience of the workforce.
Step 1. Identify and assign resources for the training and program management functions.
- The trainer(s) should have a strong trade background in a variety of electrical work.
Step 2. Determine a list of personnel whose duties will routinely be exposed to energized electrical circuits. Use first line supervision to assist in the development of this list.
Step 3. Develop a budget framework addressing the elements included in this document.
Step 4. Determine a plan for procuring the PPE and equipment. A combination of open purchases and contracts to obtain the PPE and equipment may be required.
Step 5. Procure the PPE and Equipment for the identified personnel. Note that all people that are trained will not necessarily receive all the equipment and/or PPE. For instance, an Electrical Engineering Technician will receive the training, but may not require a LOTO kit.
Step 6. Stand-up or modify a Rubber Goods program based on the written documentation and assign an Electrical PPE Coordinator.
Step 7. Conduct Training on all SOPs.
Step 8. Issue PPE/Equipment
Step 9. Stand-up OC and support activities related to LOTO (log books, etc.).
Step 10. Identify an on-site source for follow-on training and new-employee training.
Step 11. Continuously up-date training and reviews of the Electrical SAFE Program.
Step 12. Follow up on the planned reviews.
From United States, Fpo
497Step 1. Identify and assign resources for the training and program management functions.
- The trainer(s) should have a strong trade background in a variety of electrical work.
Step 2. Determine a list of personnel whose duties will routinely be exposed to energized electrical circuits. Use first line supervision to assist in the development of this list.
Step 3. Develop a budget framework addressing the elements included in this document.
Step 4. Determine a plan for procuring the PPE and equipment. A combination of open purchases and contracts to obtain the PPE and equipment may be required.
Step 5. Procure the PPE and Equipment for the identified personnel. Note that all people that are trained will not necessarily receive all the equipment and/or PPE. For instance, an Electrical Engineering Technician will receive the training, but may not require a LOTO kit.
Step 6. Stand-up or modify a Rubber Goods program based on the written documentation and assign an Electrical PPE Coordinator.
Step 7. Conduct Training on all SOPs.
Step 8. Issue PPE/Equipment
Step 9. Stand-up OC and support activities related to LOTO (log books, etc.).
Step 10. Identify an on-site source for follow-on training and new-employee training.
Step 11. Continuously up-date training and reviews of the Electrical SAFE Program.
Step 12. Follow up on the planned reviews.
From United States, Fpo
Dear Raghu
Thanks for the inputs on the electrical safety program...
Can you please let us know the source of the information... I am missing the initial steps like:
1. Identifying the existing control measures / OFI's through a detailed Electrical Safety Audit.
2. Setting up all the infrastructure requirement needed for implementing the program effectively.
Nice thread started... We can go for a detailed discussion on the entire elctrical safety program development for any company in this... Requesting interested forum members to come forward with their inputs/concerns on electrical safety at your workplace...
From India
Thanks for the inputs on the electrical safety program...
Can you please let us know the source of the information... I am missing the initial steps like:
1. Identifying the existing control measures / OFI's through a detailed Electrical Safety Audit.
2. Setting up all the infrastructure requirement needed for implementing the program effectively.
Nice thread started... We can go for a detailed discussion on the entire elctrical safety program development for any company in this... Requesting interested forum members to come forward with their inputs/concerns on electrical safety at your workplace...
From India
Dear Dipil,
It's not a copyright material but its confidential material just i had extract and post the single page only. However i willl forward the same to you yaaa., Your're right its one of the worth document on the mentioned subject.
One more thing you can get the ESAMS link/details on that document as well. Its worth to know, In future sometimes it will help you.
From United States, Fpo
It's not a copyright material but its confidential material just i had extract and post the single page only. However i willl forward the same to you yaaa., Your're right its one of the worth document on the mentioned subject.
One more thing you can get the ESAMS link/details on that document as well. Its worth to know, In future sometimes it will help you.
From United States, Fpo
Ok Let's start.,,,
1. Identifying the existing control measures / OFI's through a detailed Electrical Safety Audit.
Who is the competent person to conduct the Electrical Safety Audits did they have to need any VERIFIABLE CREDENTIALS? to perform the Electrical Audit as per Factory Act or Any IS standards?
Reason i asked this question, In OSHA 1910 and 1926 it doesn't required any CREDENTIAL'S to perform work in electrical (construction) or inspections but In EM 385-1-1 its clearly states the CREDENTIALS requirements.
For example: If we are doing electrical inspection in panel board what we need to consider during our inspection? i.e, Circuit drawing ,,
Split A/C is part of our electrical inspection, did they required DISCONNECT SWITCH for Split A/C's if yes means why??? If no means, what is the other option?
2. Setting up all the infrastructure requirement needed for implementing the program effectively.
Infrastructure is suppose to be a part of all our training programs.
I have a lot questions on this topic will update one by one...
Team,,
Awaiting for your inputs.
From United States, Fpo
1. Identifying the existing control measures / OFI's through a detailed Electrical Safety Audit.
Who is the competent person to conduct the Electrical Safety Audits did they have to need any VERIFIABLE CREDENTIALS? to perform the Electrical Audit as per Factory Act or Any IS standards?
Reason i asked this question, In OSHA 1910 and 1926 it doesn't required any CREDENTIAL'S to perform work in electrical (construction) or inspections but In EM 385-1-1 its clearly states the CREDENTIALS requirements.
For example: If we are doing electrical inspection in panel board what we need to consider during our inspection? i.e, Circuit drawing ,,
Split A/C is part of our electrical inspection, did they required DISCONNECT SWITCH for Split A/C's if yes means why??? If no means, what is the other option?
2. Setting up all the infrastructure requirement needed for implementing the program effectively.
Infrastructure is suppose to be a part of all our training programs.
I have a lot questions on this topic will update one by one...
Team,,
Awaiting for your inputs.
From United States, Fpo
he required PPE / Guidelines for safe work should also be included in the SOPs for the tasks to be carried out.
From India, Mumbai
From India, Mumbai
Dear Raghu
Nice to see your inputs... Let's make it forward...
Let me give my inputs in the questions raised by you:
1. Who is the competent person to conduct the Electrical Safety Audits did they have to need any VERIFIABLE CREDENTIALS? to perform the Electrical Audit as per Factory Act or Any IS standards?
According to me a person who is having enough expertise on Electrical Systems can do the audit. Even though if the person is not having Electrical Diploma or Degree he can do the audit if he is having good knowledge and experience regarding electrical safety.Factories Act or IE Rules not spells out any requirement which required for the auditor.
2. Reason i asked this question, In OSHA 1910 and 1926 it doesn't required any CREDENTIAL'S to perform work in electrical (construction) or inspections but In EM 385-1-1 its clearly states the CREDENTIALS requirements.
For example: If we are doing electrical inspection in panel board what we need to consider during our inspection? i.e, Circuit drawing ,,
For doing work in Electrical Installations there is certain qualification is required. As per IE Rules one need to get a Electrician certificate from the Electrical Inspector of particular state.
3. Split A/C is part of our electrical inspection, did they required DISCONNECT SWITCH for Split A/C's if yes means why??? If no means, what is the other option?
While doing inspection, we don't need to disconnect switch, if it is only a visual inspection. But when comes to maintenance or cleaning we have to ensure that supply is switched off... Normally what will happen is the outdoor unit of AC is on the outer wall of the building and the ON / OFF switch mainly in the building. So one when going to do the maintenance in this outdoor unit he has to ensure that no unauthorized energization taking place. So better option to switch off the AC, put a lock out on the switch, its available in market. If not put a stand by person nearby the switch.
4. Infrastructure is suppose to be a part of all our training programs.
What I mean by infrastructure is the protective devices for electrical safety... Like RCCB, Relays, Rubber Mats, Non-contact type voltage detector... A lot many things we should incorporate into the existing system to make our electrical system a safe one...
@Brinda Sherman
Thanks for showing interest into the discussion and come up with your thoughts... Do try to give more inputs...
@ All: Come up with your thoughts please... Let's make a great discussion on Electrical Safety...
Now I request to all to come with your inputs on the questions raised by Raghu... Then we can move to another questions...As Raghu said, I also do have lot of concerns on Electricity in my mind... Please come forward...
From India
Nice to see your inputs... Let's make it forward...
Let me give my inputs in the questions raised by you:
1. Who is the competent person to conduct the Electrical Safety Audits did they have to need any VERIFIABLE CREDENTIALS? to perform the Electrical Audit as per Factory Act or Any IS standards?
According to me a person who is having enough expertise on Electrical Systems can do the audit. Even though if the person is not having Electrical Diploma or Degree he can do the audit if he is having good knowledge and experience regarding electrical safety.Factories Act or IE Rules not spells out any requirement which required for the auditor.
2. Reason i asked this question, In OSHA 1910 and 1926 it doesn't required any CREDENTIAL'S to perform work in electrical (construction) or inspections but In EM 385-1-1 its clearly states the CREDENTIALS requirements.
For example: If we are doing electrical inspection in panel board what we need to consider during our inspection? i.e, Circuit drawing ,,
For doing work in Electrical Installations there is certain qualification is required. As per IE Rules one need to get a Electrician certificate from the Electrical Inspector of particular state.
3. Split A/C is part of our electrical inspection, did they required DISCONNECT SWITCH for Split A/C's if yes means why??? If no means, what is the other option?
While doing inspection, we don't need to disconnect switch, if it is only a visual inspection. But when comes to maintenance or cleaning we have to ensure that supply is switched off... Normally what will happen is the outdoor unit of AC is on the outer wall of the building and the ON / OFF switch mainly in the building. So one when going to do the maintenance in this outdoor unit he has to ensure that no unauthorized energization taking place. So better option to switch off the AC, put a lock out on the switch, its available in market. If not put a stand by person nearby the switch.
4. Infrastructure is suppose to be a part of all our training programs.
What I mean by infrastructure is the protective devices for electrical safety... Like RCCB, Relays, Rubber Mats, Non-contact type voltage detector... A lot many things we should incorporate into the existing system to make our electrical system a safe one...
@Brinda Sherman
Thanks for showing interest into the discussion and come up with your thoughts... Do try to give more inputs...
@ All: Come up with your thoughts please... Let's make a great discussion on Electrical Safety...
Now I request to all to come with your inputs on the questions raised by Raghu... Then we can move to another questions...As Raghu said, I also do have lot of concerns on Electricity in my mind... Please come forward...
From India
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.
5 Step EI Model.ppt